SR AD40ALK-A01N 

Safety coded magnetic sensor with actuator

Housing

Housing made of glass fibre reinforced technopolymer, self-extinguishing. Versions with integrated cable 4 x 0.22 mm2 or 6 x 0.25 mm2, length 2 m, other lengths 0.5 m … 10 m on request

Versions with integrated M8 connector

Versions with 0.1 m cable length and M12 connector, other lengths from 0.1 … 3 m on request

Protection degree: IP67 acc. to EN 60529

IP69K acc. to ISO 20653

(Protect the cables from direct high-pressure and high-temperature jets)

Main features

⦁ Actuation without mechanical contact

⦁ Output contacts: 2NC, 1NO+2NC or 1NO+1NC

⦁ Insensitive to dirt

⦁ Protection degrees IP67 and IP69K

⦁ Coded actuator

⦁ Technopolymer housing

⦁ Versions with M8 or M12 connector

Quality marks:        

UL approval: E131787

TÜV SÜD approval: Z10 15 08 75157 008

EAC approval: RU C-IT.AД35.В.00454

Compliance with the requirements of: Low Voltage Directive 2014/35/EU Machinery Directive 2006/42/EC

EMC Directive 2014/30/EU.

General data

For safety applications up to: SIL 3 acc. to EN 62061

PL e acc. to EN ISO 13849-1

Interlock, no contact, coded: type 4 acc. to EN ISO 14119

Coding level: low acc. to EN ISO 14119

Safety parameter B10d: 20,000,000 (with compatible Pizzato Elettrica safety modules)

400,000

(at max. load: DC12 24 V 250 mA)

Service life: 20 years

Ambient temperature: -25°C … +80°C Ambient temperature with flexible installation cable: -5°C … +80°C

Vibration resistance: 10 gn (10 … 150 Hz) acc. to

IEC 60068-2-6

Shock resistance: 30 gn; 11 ms acc. to EN 60068-2-27

Pollution degree 3

Screw tightening torque: 0.8 … 2 Nm

In compliance with standards:

IEC 60947-1, EN 60947-1, IEC 60947-5-1, EN 60947-5-1, EN 60947 5-2, EN 60947-5-3

(in connection with safety module), EN ISO 14119, EN ISO 12100, EN ISO 13849-1, EN ISO 13849-2, IEC 60204-1, EN 60204-1, IEC 60529, EN 60529, ISO 20653,

UL 508, CSA 22.2 No.14 .

Approvals:

UL 508, CSA 22.2 No.14 , EN ISO 13849-1, EN 60947-5-3, EN 50178, EN 61508-1,

EN 61508-2, EN 61508-4, IEC 62061, EN 60947-1.

Actuation data

Assured operating distance Sao 5 mm with actuator SM A01N

Assured release distance Sar 15 mm with actuator SM A01N

Repeat accuracy ≤ 10%

Switching frequency up to 150 Hz

Distance between two sensors Min. 50 mm

Electrical data

Rated operating voltage Ue: 24 Vac/dc

Rated operating current Ie: 0.25 A (resistive load)

Rated insulation voltage Ui: 120 Vac (with cable)

60 Vac / 75 Vdc (with M8 connector)

120 Vac (with M12 connector, 4-pole) 30 Vac / 36 Vdc (with M12 connector, 8-pole)

Rated impulse withstand voltage (Uimp): 6 kV

1.5 kV (with connector)

Thermal current Ith: 0.25 A

Maximum switching load: 6 W (resistive load)

Protection fuse: 0.25 A type F

Electrical endurance: 1 million operating cycles

Connection with safety modules for safety applications:

Connection with safety modules CS AR-01••••; CS AR-02••••; CS AR-04••••; CS AR-05••••; CS AR-06••••; CS AR-08••••; CS AR-46•024; CS AR-91••••; CS AT-0•••••; CS AT-1•••••; CS AT-3•••••; CS FS-5•••••; CS MF•••••-••; CS MP•••••-••. When connected to the safety module, the sensor can be classified as a control circuit device up to PDF-M (EN 60947-5-3). The system can be used in safety circuits up to PL e/SIL 3/category 4 in accordance with EN ISO 13849-1.

 Features approved by UL

Utilization categories: 24 Vdc, 0.25 A (resistive load). Housing features type 1, 4X “indoor use only”, 12. Accessory for CS series.

In compliance with standard: UL 508, CSA 22.2 No.14

  Features approved by TÜV SÜD

Supply voltage: 24 Vac/dc

Rated operating current (max.): 0.25 A Ambient temperature: -25°C … +80°C Protection degree: IP67

PL, category: PL e, category 4 with CS AR-08

In compliance with standards: 2006/42/EEC Machine Directive, EN ISO 13849-1:2008, EN 60947-5-3/A1:2005, EN 50178:1997,

EN 61508-1:1998 (SIL 1-3), EN 61508-2:2000 (SIL 1-3), EN 61508-4:1998

(SIL 1-3), IEC 62061:2005 (SIL CL 3), EN 60947-1